In past few decades industrial manufacturing sector has grown with a rapid pace leading to higher living standards. This has also led to major problem by form industrial effluent and household sewage. Vast quantities of waste water have damaged the eco system and polluted our water source to a great extent. Toshio Technology has been making every endeavor in developing the waste water treatment equipment. In addition to waste water pumps and sewage pumps, the company has developed submersible aerator for efficient treatment rate of waste water. These aerators have been widely used in domestic and overseas waste water treatment plants.
Toshio offer highly reliable and efficient solutions for power, chemical and petrochemical applications. Designed to handle large amounts of liquid carryover without difficulty, the TCM pump delivers reliable, long lasting performance under the most demanding applications.
Pumps were created for the chemical, petrochemical and power industries as well as other high vacuum applications. The small and compact design is easy to maintain, with both rotors encased in one body. Rotors blades are shrouded to improve strength and reliability.
They are designed to operate at very low suction pressure levels (less than 10 torr) with low vapor pressure seal liquids. In many applications, this translates into considerable operational savings by reducing the number of stages on hybrid systems. For example, a three stage jet system with glycol as motive and seal liquid can be reduced to a two stage system.
Products suitable to transfer treated water without any solids or fibres.
Economical range for domestic or commercial applications.
Agriculture, irrigation, drip and sprinkles systems. gardening and nurseries. Domestic water supply. High rise buildings, hotels and hospitals. Chillers.
Suitable for pumping drainage water and waste water. With 35 up to 65 mm spherical clearance they are able to pump liquids with larger suspended solids like fibers, textiles etc.
They are used for various applications in public and private sector, trade and industry.
|Single Phase||0.5 to 5HP|
|Three Phase||2 to 20HP|
|RPM||1450 / 2900|
|No. of Stages||1|
|Head||6 to 75 mtrs|
|Discharge||100 to 4200 lpm|
Compact design is easy to handle
The angular contact ball bearing resists to axial force.
Gland packing and mechanical seal options available
Axial inlet and radial outlet
Single stage mono block design
High grade cast iron motor body and pump casing
Mechanical seal (standard)/ gland packing available on demand
Dynamically balanced rotor and impeller
The conical port design of the TCM pumps works with a water cooled condenser to increase capacity and efficiency.
With their integral two stage rotors, are able to condense process vapors and to recover or dispose of them.